|
Nortel Expansion Cards
|
The cards below allows you to affordably expand your Nortel ICS system. Adding new stations or line capabilities
in a modular fashion is both cost effective and easy.
Please contact us if you need an explanation of the card's functionality or need a price quote.
|
|
Fiber Trunk Module 12x0
The Fiber Trunk Module is installed in conjunction with a 2 Port
or 6 Port Expansion Cartridge and allows the addition of up to three
Trunk Cartridges. The Fiber Trunk Module requires a power bar for
installation. The Fiber Trunk Module user fiber-optic DS-30 cables
instead of copper DS-30 cables. For use on the Modular ICS only.
|
|
Fiber Station Module 0x16
The Fiber Station Module is installed in conjunction with a 2 Port
or 6 Port Fiber Expansion Cartridge and allows the addition of up
to 16 station sets. The Fiber Station Module requires a power bar
for installation. It uses fiber-optic DS-30 cables instead of copper
DS-30 cables. For use on the Modular ICS only. |
|
2 Port Expansion Card
This cartridge allows the addition of up to two Fiber Trunk or
Fiber Station Modules. The cartridge is required to enlarge the
system beyond the base controller. The cartridge uses a fiber-optic
DS-30 cable that is included. For use on the Modular ICS only.
|
|
6 Port Fiber Expansion Card
This cartridge allows the addition of up to six Fiber Trunk or
Fiber Station Modules. This cartridge is required to enlarge the
system beyond the base controller. This cartridge uses a fiber-optic
DS-30 cable that is included. For use on the Modular ICS only. .
|
|
Ls/Ds Truck Cartridge 4x0
This Loop Start/Disconnect Supervision trunk cartridge supports
disconnect supervision, and provides access for up to 4 analog
central office lines. This trunk cartridge is compatible with the
Compact ICS, the Modular 8X24. It may be inserted into the Compact
ICS core trunk slots, the Modular ICS core trunk slots, the Copper
Trunk Module or the Fiber Trunk Module.
|
|
Caller ID Trunk Cartridge 4x0
The CI trunk cartridge is a loop start, analog trunk cartridge
with the capability to detect and translate incoming CMS/CLASS information
from the central office for display and use on Norstar station sets.
It supports disconnect supervision, and provides access for up to
4 central office lines. This trunk cartridge is compatible with
the Compact ICS, and Modular 8x24 (Release DR5 or higher). It may
be inserted into the Compact ICS core trunk slots, the Modular ICS
core trunk slots, the Copper Trunk Module or the Fiber Trunk Module.
|
|
Digital Trunk Cartridge T1
The Digital Trunk Interface (DTI) terminals a 24-channel T1 link
from a public or private network. It will also support fractional
T1. An RJ48 jack provides the interface to the T1 network. Each
of the 24 channels can be configured to emulate either loop-start,
E&M, or DID trunks. The DTI has an integrated Channel Services
Unit (CSU). The CSU provides line isolation, signal regeneration,
and network performance monitoring. The CSU can be turned off for
use with an external CSU. Must use with clock services cartridge.
For use on the Modular ICS only.
|
|
DID Trunk Cartridge
The Direct
Inward Dialing Trunk cartridge routes calls from the public network
directly to Norstar station sets, bypassing an attendant and therefore
reducing traffic to the central answering position. This card provides
access for up to 4 central office lines. This trunk cartridge is
compatible with the Modular 8x24 (Release DR4 or higher) and the
Modular ICS and supports disconnect supervision, but does not support
CMS/CLASS services. It may be inserted into either the Copper Trunk
Module or the Fiber Trunk Module.
|
|
Analog Station Module 0x8
The Norstar Analog Station Module serves as an interface between a Norstar-PLUS
Modular ICS and analog devices such as FAX machines, FAX Modems,
credit card verification devices, as well as analog voice equipment.
The ASM is an 8 port module that connects to the Modular ICS unit
via a Modular ICS Fiber Expansion Cartridge. Two ASMs may be daisy-chained
together and connected to a single fiber receptacle on an expansion
cartridge. The ASM supports the same features and functionality
as the ATA-2. The ASM will support data modem transmission speeds
up to 33.6 kb/s.
|
